Announcement

Collapse
No announcement yet.

Material selection for sealing component

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Material selection for sealing component

    Iím exploring the possibility of using an elastomeric foam for a sealing component.

    The seal is for use in a cannula or tube, to form a pressure barrier between spaces,
    and adapted to accommodate instrument diameters ranging from 5 to 12 mm passed through.

    Essentially a plug with a small central orifice, slightly smaller than 5 mm.
    The foam should compress and displace according to the diameter of the instrument placed through.

    Any suggestions or recommendations for such material are greatly appreciated.

    Thanks
Working...
X