Clear all

Master curve shift factors for target temperature

1 Posts
1 Users
Posts: 4
Topic starter
Active Member
Joined: 3 months ago

Currently, the TTS option selects a reference temperature that yields the best master curve fit and then translates the master curve to the specified target temperature T0. 

Is there a way to use the target temperature itself as the reference and have it search for C1, C2 parameters at that temperature only ? A few of the papers on polymer composites with TTS use the same reference temperature across samples with varying filler % to compare the C1 and C2 values. For example, I'm getting C1,C2 values for T0 = 25.48 in the runtime output (instead of the target, 22.5)

One of the modulus/frequency curves is tested at 22.5 C, so I would like to keep it as is and shift the other curves to this temperature.