Notifications
Clear all

[Solved] Material Model for Silicone Rubber


Jorgen
Posts: 3896
Moderator
Topic starter
(@jorgen)
Member
Joined: 2 years ago

Here is a calibrated material model for a generic silicone rubber tested at room temperature. To use this material model you will need to first install the MCalibration software, and then export the model to you favorite FE software. The calibrated material model is the PolyUMod Three Network (TN) model.

Note, you can get a free trial license to MCalibration and PolyUMod using the link on the main page.

3 Replies
tanergenc
Posts: 2
(@tanergenc)
New Member
Joined: 7 months ago

Hi Mr.Jorgen,

I need material data of silicone rubber VQM SHa 55.But I couldnt fine anywhere.

What is shore the "POLYUMOD-Bergstrom-Boyce_Silicone_Rubber"?

Reply
Jorgen
Posts: 3896
Moderator
Topic starter
(@jorgen)
Member
Joined: 2 years ago

Unfortunately that experimental data is a few year old, and I did not measure the Shore hardness value. Also, I don't have more of that material to test.

If you have samples of your specific silicone rubber then I can experimentally test if for you (for a fee..).

/Jorgen

Reply
1 Reply
tanergenc
(@tanergenc)
Joined: 7 months ago

New Member
Posts: 2

@jorgen

Hi Mr.Jorgen,

Thanks for reply, I have a small part and with spesific shape.

 

Reply
Share: