Notifications
Clear all

[Solved] Material Model for PTFE with some Graphite and Carbon Fibers  


Jorgen
Posts: 3882
Moderator
(@jorgen)
Member
Joined: 1 year ago

Here is a calibrated material model for a PTFE (Polytetrafluoroethylene) with a few percent graphite particles and a few percent of glass fibers. The material was tested at room temperature. To use this material model you will need to first install the MCalibration software, and then export the model to you favorite FE software. The calibrated material model is the PolyUMod Three Network (TN) model.

Note, you can get a free trial license to MCalibration and PolyUMod using the link on the main page.

Share: