Hi,
I am fairly new to abaqus and need to set up a Thermal Loaded creep analysis.
The part Temp needs to be raised to 120 deg, held for 60 mins and cooled down to room Temp and checked for permanent set.
I have the following properties for Creep,
*ELASTIC,MODULI=INSTANTANEOUS
10000.,0.4833
*VISCOELASTIC,TIME=PRONY
0.901001,0.0,0.99
*TRS,DEFINITION=WLF
70.,4.92,215.
what else do i need ..?
Please help me with the STEP cards, for this analysis.
I greatly appreciate your help.
best Regards
Nadia
