
Why FEA Underpredicts Residual Strain in Bending
Did you know that almost all FE simulations underpredict the residual strain / displacements in BENDING. This article explains why.
Did you know that almost all FE simulations underpredict the residual strain / displacements in BENDING. This article explains why.
Part 3 in our series on how to calibrate a material model from tension force data. This article focuses on using Abaqus for the calculations.
Part 1: Tutorial on how to predict the cold drawing or necking response of thermoplastics (such as polycarbonate).
Different material models for a 3D printed nylon single filament tested in compression.
Material models for UHMWPE used in total knee replacement prostheses.
Discussion about different material models to use when modeling a tire.
Material modeling of elastomer foams for vibration damping.
Demonstration of how to use finite element analysis to analyze the performance of a bioabsorbable coronary stent design.
A summary presentation on how to simulate a threaded connection with a Teflon seal.