Announcement

Collapse
No announcement yet.

ANSYS UserMat Conference

Collapse
X
Collapse

  • ANSYS Conference in Boston

    I recently gave a presentation with the title Advanced User-Material Modeling of Cather Kinking at the ANSYS Regional Conferences in Boston on Oct 15, 2010. In this presentation I discussed some of my recent ANSYS simulation work (using UserMat subroutines) related to geometric instabilities of catheters. Like Abaqus, ANSYS supports the use a advanced user-material models and the PolyUMod library is now available for both Abaqus and ANSYS.


    Send me a message if you would like to learn more about our work in this area.

    -Jorgen
      Posting comments is disabled.

    Article Tags

    Collapse

    Latest Articles

    Collapse

    • High-Strain Rate Testing and Modeling of Solid Polymers
      Jorgen
      [ATTACH=CONFIG]607[/ATTACH]

      Time: Nov 19-20, 2014.
      2013-02-03, 08:41
    • MCalibration on Raspberry Pi
      Jorgen
      Raspberry Pi is a credit-card-sized fully functional mini computer (available for about $35) running Linux. I have created a version of MCalibration , the most advanced material model calibration software that is currently available, that runs great on the Raspberry Pi computer. You can download the MCalibration application here....
      2013-01-05, 16:58
    • FEA of PLLA Interference Screws
      Jorgen
      I gave a presentation on advanced FE modeling of PLLA intereference screws at the ANSYS User's conference in Boston on Sep 14, 2011. In my presentation I discussed how the design of degradable screws can be optimized for use in Anterior cruciate ligament (ACL) reconstruction surgery. PLLA is a non-linear viscoplastic material that can be accurately modeled using the PolyUMod library.
      ...
      2011-08-22, 13:55
    • ANSYS Conference in Boston
      Jorgen
      I recently gave a presentation with the title Advanced User-Material Modeling of Cather Kinking at the ANSYS Regional Conferences in Boston on Oct 15, 2010. In this presentation I discussed some of my recent ANSYS simulation work (using UserMat subroutines) related to geometric instabilities of catheters. Like Abaqus, ANSYS supports the use a advanced user-material models and the PolyUMod library is now available for both Abaqus and ANSYS.
      ...
      2010-10-17, 20:19
    • Bergstrom Simulia Conference 2010
      Jorgen
      In May 2010, I gave a presentation at the Simulia User's Conference in Providence, RI. My talk had the title: "Finite Element Modeling of Thermoplastics at Different Materials". This is an area in which I have extensive experience, and it is an topic that a lot of people have problems with. In my presentation I used non-linear viscoelastic experimental data for a Polycarbonate (Lexan from SABIC Innovative Plastics). I then demonstrated that standard metal plasticity with rate dependence: does not capture the non-linear viscoelastic response even at strain...
      2010-06-20, 13:46
    • Three Network Model for Thermoplastics
      Jorgen
      I have developed a new advanced thermomechanical constitutive model for thermoplastic materials. In the new model the micostructure of the material is represented using three distinct structural domains that capture the experimentally observed non-linear, time- and temperature-dependent response at both small and large strains. The attached paper presents the theory for the model, and the model calibration and validation are exemplified by direct comparison with experimental data for UHMWPE. Download the paper from this ...
      2010-06-20, 13:18
    Working...
    X