Results 1 to 3 of 3

Thread: One nodes are missing degree of freedoms.

  1. #1

    One nodes are missing degree of freedoms.

    Well,here is my INP file:
    *Heading
    ** Job name: Job-squareplateoriginal Model name: Model-1
    ** Generated by: Abaqus/CAE 6.10-1
    *Preprint, echo=NO, model=NO, history=NO, contact=NO
    **
    *Node
    1, -10, 10, 0
    9, -10,-10, 0
    81, 10, 10, 0
    89, 10,-10, 0
    *NGEN,NSET=BOTTOM
    9,89,10
    *NGEN,NSET=TOP
    1,81,10
    *NGEN,NSET=LEFT
    1,9,1
    *NGEN,NSET=RIGHT
    81,89,1
    *NFILL,NSET=NALL
    TOP,BOTTOM,8,1
    *Node,NSET=RP
    100, 15, 0, 0
    *Element, type=S4R
    1, 2,12,11,1
    *ELGEN,ELSET=ELALL
    1,8,1,1,8,10,10
    *Equation
    3
    RIGHT,1,1,LEFT,1,-1,RP,1,-1
    *Equation
    2
    RIGHT,2,1,LEFT,2,-1
    *Equation
    2
    TOP,1,1,BOTTOM,1,-1
    *Equation
    2
    TOP,2,1,BOTTOM,2,-1
    ** Section: Section-1
    *Shell Section, elset=ELALL, material=Material-1
    1,5
    **
    ** MATERIALS
    **
    *Material, name=Material-1
    *Elastic
    1., 0.3
    ** ----------------------------------------------------------------
    **
    ** STEP: Step-1
    **
    *Step, name=Step-1
    *Static
    1., 1., 1e-05, 1.
    **
    ** BOUNDARY CONDITIONS
    **
    ** Name: BC-RP Type: Displacement/Rotation
    *Boundary
    RP, 1, 1, 0.2
    RP, 2, 2
    RP, 6, 6
    **
    ** OUTPUT REQUESTS
    **
    *Restart, write, frequency=0
    **
    ** FIELD OUTPUT: F-Output-1
    **
    *Output, field, variable=PRESELECT
    **
    ** HISTORY OUTPUT: H-Output-1
    **
    *Output, history, variable=PRESELECT
    *End Step
    Yejie Shan

  2. #2
    The problem is that a square RVE is subjected to a displacement boundary condition in the horizontal direction while deformation along the vertical direction is zero.Then I encountered the trouble:1 nodes are missing degree of freedoms;The MPC/Equation/Kinematic coupling constrains can not be formed. I opened the ODB file and found it was the node located at the upper right corner caused the error, which made me confused. I don't know the reason for the error and the reason Why this node would be the only one. Because I think this node is not special, at least the node located at the bottom right corner should have the same status.Hope for advices and thanks in advance!node.jpg
    Yejie Shan

  3. #3

    Same problem that I am facing for RVE

    I read your post and I notice that today , where I was working on my RVE , same problem happened , the thing is that that one node , is completely irrelevant , I mean , I have just put a constraint on it , between this node , and it's relative node on the opposite side , and the corresponding two master nodes , and nothing else , but I have errors only on this node , just somewhere in the middle of all my other nodes

    did you get any idea , what was the problem , in your case ?

    I would really appreciate to hear your advices

    best regards

Similar Threads

  1. Replies: 0
    Last Post: 2012-03-15, 21:07
  2. User Subroutine SDVINI Missing
    By ak-jhon in forum Constitutive Models
    Replies: 1
    Last Post: 2010-03-09, 20:51
  3. how to get the information of many nodes?
    By coco81 in forum Finite Element Modeling
    Replies: 0
    Last Post: 2010-02-26, 06:43
  4. Element is missing property definitions error
    By Fma10 in forum Finite Element Modeling
    Replies: 2
    Last Post: 2009-11-05, 11:23
  5. User Subroutine SDVINI Missing
    By khanolkar21 in forum Constitutive Models
    Replies: 3
    Last Post: 2009-04-15, 19:02

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •