View Full Version : Vibration in Ansys
I want to measure the spectrum of the vibration of a machine. Later I want to place antivibratory elements to isolate of the support using ansys. Can someone help me? At the moment I donīt know the machine that I am going to use. I write to know if someone has investigated it.Thank you very much.
Is your question regarding modeling vibrations or measuring them. I have measured and analysed vibrations from some machines. If measurement is the question, do let me know.
Still I don't know exactly which is my aim. Could you send me your information? Pobably some things serve me. Thank you very much. I am sorry if my English is not very good. Thank you very much.
Seems like you want to investigate the dynamics of the machine. I would recommend you to first collect some data by measuring vibrations. You can use accelerometers or laser sensor, depending upon your application. After that, you might wanna go ahead and try analysing the data. There has been a lot of work done towards investigating dynamics of particular machining operations. I would recommend you to have a look at literature as well. This might give you some directions.
Hope this helps.
My intention is to do the study physically and later to simulate it with Ansys, for this reason, if you have investigated on this, I would be grateful if you send me your information or recommend me some literature. Mi mail is: firstname.lastname@example.org. Thank you very much. Regards, Javier
What I really want to do is to place a vibratory machine on a table and to measure its response in frequency. After, insert something like rubber between the table and the machine, and repeat the experiment. Thank you very much. Regards, Javier
Check for my mail in your inbox.
Who are they?? Where can I find them??
Thank you very much for your time
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.